S1 * S2
Overview
Multiplies sample values of all channels with the sample values of the same channels on the other input.Operator ports
Input S1: Floating point valuesInput *S2: Floating point values
Output S1*S2: Floating point values
Properties
Find more information about changing properties here: linkCaption
type: Word or phraseThe name of the object in the project. This name must not contain '.' or '$' characters.
Every object has the Caption property. This property is very important, because it is the name by which Polybench recognizes this object.
It is allowed to give multiple objects the same name, as long as the objects are of the same type. In that case, a reference to this caption includes all the objects with the same caption.
In Polybench, every object can be addressed by an Address specifier, which starts with the dollar sign, for example: $My Page.My Object. 'My Page' would be the Caption of a page, and 'My Object' the Caption of an object on that page.
It is allowed to give multiple objects the same name, as long as the objects are of the same type. In that case, a reference to this caption includes all the objects with the same caption.
In Polybench, every object can be addressed by an Address specifier, which starts with the dollar sign, for example: $My Page.My Object. 'My Page' would be the Caption of a page, and 'My Object' the Caption of an object on that page.
Documentation
type: See descriptionOptional documentation of this object.
It is good practice to write in short notes why you have used this object, and why its properties are set the way they are set. If this object is an operator, the Documentation text is displayed below the operator symbol.
Details
Case 1: equal number of channelsIf both input buses contain an equal number of channels, the sample value of every channel at input S1 is multiplied to the value of the channel with the same number at input S2 and put to the same output channel.
Case 2: input with one channel
If one input bus contains one channel and the other input contains more than one channel, the sample value of the single channel input is multiplied to the value of every channel of the other input.
Case 3: unequal number of channels
If the two input buses contain an unequal number of channels, and neither has one channel, then the operator outputs no data and a warning is displayed below the symbol.
It is allowed to connect a signal that feeds back from the output to one of the inputs that originates from the output. It is however recommended to only feed back on the lower (S2) input.
It is not allowed to directly add signals from two different sources. You need to synchronize the signals first, using the Synchronizer (link).
The calculation is also performed on constant values (e.g. from a Constant (link); either if one of the inputs is a constant or both.